Evenflo convertible Car Seats

Evenflo convertible car seats have been on the market for decades now. They are considered to be one of the safest convertible car seats for children and are one of the most popular. Evenflo convertible car seats are easy to use, lightweight, and are also made of durable material.

Evenflo convertible car seats are used by parents who need a seat that can be easily folded for transporting and stored in a small space. They come with several safety features that are designed to keep children safe in an accident. They can be used by children from 5 to 12 years old and are available in different colors.

Moreover, It is important for parents to choose the right convertible car seat for their child based on their age and size. The best convertible car seats for children are the ones that have a 5-point harness to keep them securely and safely in place.

The best convertible car seats for children can also be easily installed into the vehicle and can be removed after the child has grown out of it. They also provide head support and neck support for the child.

In this guide, I have reviewed the best convertible car seats for children, according to their weight and age. Let’s go through the detailed review of each product one by one.

• 10 Best Convertible Car Seat For Small Cars
• Different Types Of Car Seats
• What Is A Convertible Car Seat?
• Best Convertible Stroller
• Evenflo Infant Car Seats

Evenflo convertible Car Seats: Buying Guide

Easy to Use

While car seats are made to protect children, they don’t come with a manual. There are a few features to keep in mind when looking for a convertible car seat, but the most important one is the fact that it’s easy to use.

The controls are easy to access and use, and they’re located in a way that makes it simple for anyone to figure out how to use the car seat.

Installation Features

Most car seats are pretty easy to install, you should always choose a car seat that can be easy to install. 

Side Impact Protection

Side impact protection is another key factor when shopping for a convertible car seat. Most car seats offer protection from front, rear, and side impacts.

If you’re buying a car seat for your child, look for one that offers at least 5 points of protection in all three areas.

Comfort Features

Some convertible car seats have extra padding, while others have a built-in tray. You’ll also want to look for a car seat that comes with a recline option.

Height/Weight Requirements

If you’re buying a convertible car seat for a child, you’ll want to look for a seat that’s rated as being appropriate for a child in that weight range.

13 Best Evenflo Convertible Car Seats Review

Evenflo Convertible Car Seats is a popular brand of car seats. These seats are known for their ability to convert from a booster seat to a full-size car seat. This convertible car seat comes with an ergonomic design that makes it easy to adjust and use.

In this article you will read 13 Best Evenflo Convertible Car Seats Review.

Evenflo Gold Revolve360 Rotational All-in-1 Convertible Car Seat

Evenflo has been making high-quality products for kids for over 50 years. Their products provides safe, comfortable, and easy to installation features.

The Gold Revolve360 is one of their best products for parents. With a rotating car seat, you can easily get your child into and out of the car. It’s also safer as it helps prevent rollover injuries.

There are three modes that you can choose from depending on your child’s size. For instance, there’s a rear-facing mode for babies up to 50 pounds. There’s a forward-facing mode for toddlers between 22 and 65 pounds, and a booster mode for children up to 120 pounds.

The car seat is also very easy to install, with no tools required. It simply clicks together and snaps apart to install and remove it.

You can also clean the cover with ease. Just slide it off and wash it. It also has a quick-clean cover that makes cleaning and storing it easy.

The Revolve360 is extremely durable, with a 10-year warranty for the whole product. It’s also very comfortable for your child. They even have a special, ergonomic design to help keep your child secure and comfortable.

It’s also made of bamboo, which is one of the safest materials for kids.

Additionally, the best thing about the Revolve360 is how versatile it is. It’s ideal for babies and kids of all ages, and it can grow with them for years.

Features

Brand: Evenflo | Installation Type: Latch or Seat Belt | Material: Polyester | Color: Onyx Black, Moonstone Gray, Opal Pink & Sapphire Blue | Orientation: Convertible | Dimensions: 21 x 19.8 x 25.9 inches | Target gender: Unisex | Minimum weight recommendation: ‎4 Pounds | Maximum weight recommendation: 120 Pounds | Minimum height recommendation: 17 Inches | Maximum height recommendation: 57 Inches | Harness Type: 5-point harness | Harness Covers: Yes | Product Weight: 29.6 lbs.

Reviews 

• Safety Features: 4.6/5
• Comfort: 4.6/5
• Easy to use: 4.5/5
• Value for money: 4.5/5
• Easy to install: 4.4/5

Pros:

• Good build quality
• Easy to install
• Convenient to use
• Sturdy and durable
• Easy to clean

Cons:

• High Price

Rear-Facing Mode

Child Requirements

• 1.8 – 22.6 kg (4 – 50 lbs)
• 43 – 122 cm (17 – 48 in)
• Top of child’s head is at least 2.5 cm (1 in) or more below the top of the Car Seat Headrest or Shell.
• Harness Straps must be adjusted to be AT or JUSTBELOW child’s shoulders.

AAP recommends that infants and toddlers remain in a rear-facing car seat for as long as possible, until reaching the maximum height or weight for the car seat.

The weight limit for this car seat is 65 lbs. It is strongly recommended that you use this car seat in the FORWARD-FACING orientation.

Your baby will exceed any of the size requirements above if he’s younger than 2 years old, however, you MUST DISCONTINUE using this car seat if he’s under 2.

Forward-Facing Mode

Child Requirements

• 10 – 29.4 kg (22 – 65 lbs)
• 72 – 124 cm (28 – 49 in)
• Tops of the child’s ears are at or below the top of the Car Seat headrest
• At least 2 years old
• Harness Straps must be adjusted to be AT or JUST ABOVE child’s shoulders.

You must use your child’s safety seat until he or she exceeds any size limitations indicated in the instructions below for forward-facing use.

If your child exceeds any of the sizes or weight requirements shown for CAR SEAT use, DO NOT USE. For example, if your child is 1-3 years of age, does not weigh more than 35 lbs.

Make sure the Car Seat is in the upright position when you use it. If you need assistance or have questions about Car Seats read manual of the specific product.

Booster Mode

Child Requirements

• 18 – 54.4 kg (40 – 120 lbs)
• 112 – 144 cm (44 – 57 in)
• Tops of the child’s ears are at or below the top of the Booster Seat headrest
• At least 4 years old

When to put your child in a Booster?

Booster seats has been designed to bring a youngster up to an appropriate height for using the vehicle’s lap and shoulder safety belts. The seatbelts in the car, not the Booster Seat, are the main method of restraint.

The lap and shoulder belts offer effective restraint of the upper and lower torso when used in conjunction with a Booster Seat, reducing the risk of injury in all crash situations. It’s crucial that the kid uses the seat belts correctly. In addition to fastening the vehicle’s shoulder belt, occupants should also use the lap belt.

The hip belt should rest slightly above the thighs, and the shoulder belt should rest in the centre of the back. The belt’s restraining capabilities will be compromised if the youngster leans out, shifts the belt behind his or her back, or slides it under an arm.

For US residents only, a Booster Seat may be preferable to an internal harness seat without the Tether if your kid passes the criteria for both forward-facing strapped usage and booster use and your vehicle lacks a Tether Anchorage but has lap and shoulder belts in the rear.

Instances when it could be a good idea to use a booster seat include:

It is likely that the youngster has reached or will soon reach the upper limit for their forward-facing, strapped Car Seat.

The kid is old enough that they can properly use the vehicle’s seatbelts while seated in the Booster Seat, without crossing their arms or tucking them behind their back.

Complete Installation Guide

How to Removing the Seat Shell from the Base?

1. Use the white indicator on the front of Seat Shell or the red arrow on the Buckle Storage Pouch to find the correct location.
2. To adjust the angle of the seat, raise either of the Rotation Levers located on either side of the headrest and turn the Seat Shell until the arrow on the Seat Shell lines up with the corresponding white arrow on the Base.
3. Take off the Seat Cover and set the Base aside.

How to Install the Seat Shell to the Base?

1. Look for the white arrow on the front of the Seat Shell or the red arrow on the Buckle Storage Pouch.
2. Match the white arrow on the Base with the arrow on the Seat Shell.
3. Put the Seat Shell in place on the Floor.
4. To make sure the seat is placed correctly, turn it clockwise or anticlockwise.

Now Install Lap/Shoulder Belt?

1. Install a car seat on a level surface first.
2. Before installing the car seat, detach the Seat Shell and Base.
3. Put the Base and Tether in a vehicle. The Base should be flush against the seat back of an automobile.
4. Hang the Tether Hook from the car’s Tether Anchor.
5. Squeeze the lever and elevate the LockStrong belt tensioner to release the belt when the red lock indicator light illuminates.
6. The lap/shoulder belt should go through the opposite base aperture. Tie the knot or buckle.
7. In the automobile, strap up firmly. Push the Base into the car seat with all your weight while buckling the seat belt.
8. Pulling up on the shoulder belt’s central base removes the slack after tucking the lap belt under the blue belt path guide’s tabs.
9. Pull the belt tightly around your waist and tuck the shoulder tabs within the blue belt path guide. Green indicates belt lockup.
10. Pull the Base in both directions at the belt path to secure it (side to side and front to rear).
11. Locked seatbelt. In most cars, unwinding the shoulder belt locks the retractor. Pull your shoulder harness to verify latching.
12. Tighten the Tether Adjuster Strap.
13. After fastening the Seat Shell to the Base, set it to either REAR-FACING or FORWARD-FACING, depending on the child’s height and weight, and lock it.
14. Make sure the Seat Lock Indicator is green to secure the seat.
15. When installing the seat with the child facing the rear, the Recline Adjuster must be lifted and the seat slanted to place the Recline Ball in the correct weight and height range.
16. Forward-facing seats must be upright.

How to Install Lap Belt?

1. Car Seat Shell must be removed from Base before installation.
2. Put the Base and Tether in a vehicle. The Base should be flush against the seat back of an automobile.
3. Hang the Tether Hook from the car’s Tether Anchor.
4. Squeeze the LockStrong belt tensioner handle until the RED lock indicator lights up, then lift it to release the belt and show the belt path.
5. Wrap the belt around the base and feed it through the window’s belt route aperture. Tie the knot or buckle.
6. In the automobile, strap up firmly. Push the Base into the car seat with all your weight while buckling the seat belt.
7. Pull up on the loose end after looping the belt through the blue belt path guide’s tabs.
8. After buckling up, tuck your lap belt behind the LockStrong.
9. Press the LockStrong close. The lock will turn green when closed.
10. Pull the Base in both directions at the belt path to secure it (side to side and front to rear). The Car Seat Belt Path base shouldn’t shimmy more than 2.5 cm (1 in) in either direction.
11. Tighten the Tether Adjuster Strap.
12. Attach Seat Shell to Base, swivel it to REAR-FACING or FORWARD-FACING, and lock it depending on kid size.
13. Make sure the Seat Lock Indicator is green.
14. Raise the Recline Adjuster and tilt the seat back until the Recline Ball reaches the right height and depth for the youngster.
15. Forward-facing seats must be upright.

Installing LATCH/UAS of Evenflo convertible Car Seats

1. Unstow LATCH/UAS anchors from the base.
2. Put the Base in a vehicle and remove the Tether from the Tether Storage Location underneath it. The Base must be flat and flush on the automobile seat back.
3. After finding the Tether Anchor in your automobile, loosely connect it with the Tether Hook.
4. Squeeze the LockStrong tensioner handle until the lock indicator turns red to unlock the belt route.
5. Attach LATCH/UAS Connectors to vehicle lower anchor bars. Two connections click together. To secure connections, pull hard. Mini-Latch users should never utilise the red Release Strap.
6. Vehicle bottom anchors should have maximum tension. Use your weight to press the Base into the vehicle seat by squeezing the bottom anchors.
7. Tension Tighten LATCH/UAS strap by pulling loop.
8. After tightening the LATCH/UAS, tuck the additional strap beneath LockStrong.
9. Press the LockStrong close. The lock will turn green when closed.
10. Pull Base in both directions at the belt route for a secure installation (side to side and front to rear). Car seat belt paths should not rotate more than 2.5 cm (1 in) to the side or front or back.
11. Pull the Tether Adjuster Strap tight.
12. After fastening the Seat Shell to the Base, set it to either REAR-FACING or FORWARD-FACING, depending on the child’s height and weight, and lock it.
13. Make sure the seat lock indicator is green.

How to Convert Evenflo Gold Revolve360 to Booster Mode?

1. Press the harness release button located in the centre of the front of the seat to loosen the straps. Harness Straps should be fully extended at the same time by pulling them.
2. It’s time to undo the clip and buckle on your chest.
3. The headrest pad and shoulder straps should be raised and tucked into the side wings.
4. Pull apart the seat pad and back pad at their hook-and-loop fasteners.
5. If a head and body pillow have been placed, remove them before proceeding. Then, pull the seat pad forward and unbuckle the bottom of the pad to get access to the seat bottom.
6. In order to secure the buckle, you’ll need to grab the end of the strap and rotate it until it fits into the corresponding hole in the seat’s base.
7. One way to get the Buckle Anchor to poke up through the opening is to tilt the Buckle Strap towards the slot at the back and then pull back on the strap.
8. Buckle Strap Storage Pouch for convenient transportation and safekeeping.
   To proceed with “Installing the Booster,” replace the Seat Pad and reattach the hook-and-loop fasteners to the Back Pad.

How is a Booster Seat of Evenflo Gold Revolve360 Used?

Since the Booster Seat uses the car’s existing restraint system, installing and using it is quite similar to strapping in for the ride.

1. Before beginning, make sure you have read the Booster Seat and vehicle instructions.
2. The Booster should be used with a lap and shoulder belt in the rear seat. You should never risk severe injury by using a lap belt alone with a booster seat.
3. Ensure that the base of the booster is lying flat on the car seat.
4. Buckle the lap and shoulder belt over the child’s body after they are seated in the Booster. Using the vehicle’s lap and shoulder belt to secure your youngster in BOOSTER mode requires a snug fit.
5. Double-check that the shoulder belt is centred on the shoulder and the lap belt is positioned low on the hips so that it almost touches the thighs.

How to Install the Booster of Evenflo Gold Revolve360?

1. Gather all LATCH/UAS anchors and put them in a safe area away from the base’s rear. Pull the red release strap to unplug each connection.
2. After removing the Tether from the Tether Storage Location beneath the Base, the Base should be moved to a rear seat in the car. The Base must be placed flat on the car seat and flush against the seat back.
3. Using the Tether Hook, slackly connect the Tether Anchor to the Tether Anchor after you’ve located it in your car.
4. Once the lock indication on the LockStrong belt tensioner has turned RED, you may raise the tensioner up to release the belt and get access to the belt route.
5. Fasten the LATCH/UAS Connectors to the vehicle’s lower anchor bars. When two connectors are mated, a distinct CLICK is heard. To make sure they are fastened, tug hard on the connections. If your door has a Mini-Latch, DO NOT use the red Release Strap to open it.
6. In order to move Base, press it on the back of the car seat. Tension LATCH/UAS Tighten the strap by pushing on the loop until it is secure, but not too tight.
7. Secure the remaining strap beneath the LockStrong after tightening the LATCH/UAS.
8. If you squeeze it, the LockStrong will lock all the way. When the lock is completely closed, a green light will appear.
9. Adjust the length of the tether by pulling the tether adjuster strap.
10. Attach the Seat Shell to the Base, then recline the seat all the way and turn it so that you’re facing front, before locking it into place.
11. Verify the seat is locked by making sure the Seat Lock Indicator is GREEN.

How to Install a Evenflo Gold Revolve360 in an Aircraft?

1. Recline the vehicle seat entirely and separate the Seat Shell from the Base before attempting to install the Revolve360 Extend in an aeroplane seat.
2. To seat Base in an upright position, raise the armrest of the aeroplane and do so.
3. Pull the lap belt through the slots in the belt route and OVER the LockStrong belt tensioner.
4. TIGHTEN BELT and take up any slack by tugging through the hole in the belt’s course.
5. Pull on the base just next to the belt’s route to make sure it’s snug and retighten if required.
6. In order to switch between the FORWARD and REARFACING positions, rotate the seat back into the aisle.
7. During taxiing, takeoff, and landing, remove the SensorSafe Chest Clip if it is worn. Refastening the SensorSafe Chest Clip is possible at any time during the flight or after landing, when the usage of electronic equipment is approved by the flight crew.

FAQs

How long does Evenflo revolve 360 last?

Evenflo’s new Mylar™ rotating car seat is a revolution for parents who want to make life easier when it comes to getting their child into or out of their car.

The Revolve 360’s designed for kids weighing 4 – 120 lb, grows with your child, and offers 10 years of use and 3 modes.

Is evenflo a good brand?

Evenflo is a comprehensive brand with almost a 100-year history. Evenflo makes a variety of strollers for affordable prices. You should expect quality, with useful, small features like cup holders and pockets.